Wellshow RF Connector, RF Coaxial Cable Assembly, GSM, GPS, WiFi Antenna Manufacturer » MCX Connector

MCX connector jack right angle for PCB mount and 1.37 coaxial cable

Wellshow — Wed, 10 Feb 2010 09:03:06 +0000

MCX connector is one kind of RF connectors. This MCX connector is Jack (Female) and right angle (R/A) type. It’s designed to terminate with PCB and RF coax cable at the same time. Its plating is gold over brass and compliant with RoHS, and the impedance is 50 ohm.

MCX connector is bigger than MMCX connector but smaller than SMB connector in RF connectors. MCX Connector has snap-on coupling. Besides, MCX jack crimp series still have straight bulkhead crimp jack, straight jack, straight PCB mount and SMT jack. MCX Connector commonly is used for 0~6GHz. If you need special performance request, special mechanical design, customized RF connectors, or RF cables, please contact us.

MCX connector jack right angle (R/A) PCB mount and crimp type will be soldering four legs with PCB to fix, and terminated with RF coax cable for RF signal transmitting. MCX connector is most commonly used in GPS Antenna, GSM Antenna, antenna cable, WLAN (Wireless LAN) application and so on.

Part Numbers

P/N & Drawing	Description	Cable Group	Ohm
C08BI30137003	MCX R/A jack for PCB and crimp type	1.37mm, 1.32mm	50

MCX connector jack right angle for PCB mount

Wellshow — Wed, 10 Feb 2010 09:02:33 +0000

MCX connector is not only have straight PCB but also have right angle (R/A) MMCX RF connectors. This MCX connector is jack/ female and right angle (R/A) type. It’s designed to directly solder with PCB. Its plating is gold over brass and the impedance is 50 ohm.

MCX connector is small size which compares to SMA connector or N connector in RF connectors. MCX Connector has snap-on coupling. Besides, MCX jack crimp series still have straight bulkhead crimp jack, straight jack, straight PCB mount and SMT jack. MCX Connector commonly is used for 0~6GHz. If you have special performance request, special mechanical design, customized RF connectors, or RF cables, please contact us.

MCX connector jack right angle (R/A) PCB mount type can be soldered on PCB and transmit RF Signal well between Antenna and Module board. MCX RF connector is most commonly used in GPS receiver module, GSM external Antenna or RF antenna cable these kinds of RF connectors industry.

Part Numbers

P/N & Drawing	Description	Cable Group	Ohm
C08BN31P01006	MCX connector R/A jack for PCB	N/A	50

MCX connector jack straight for PCB mount

Wellshow — Wed, 10 Feb 2010 09:02:06 +0000

MCX connector not only can terminate with RF coax cable but also PCB. This MCX connector is Jack (Female) and straight PCB type. It’s designed to terminate with PCB. Its plating is Gold over brass and the impedance is 50 ohm.

MCX connector is small size compared with SMA connectors, SMB connectors. MCX Connector has snap-on coupling and can be mated easily and quickly. Besides, MCX jack crimp series still have standard crimp jack, straight bulkhead crimp jack, , right angle (R/A) PCB jack and SMT jack. MCX Connector commonly is used for 0~6GHz. If you have special performance request, special mechanical design, customized RF connectors, or RF cables, please contact us.

MCX connector jack straight PCB mount type can be soldered on PCB and plays the role to transmit RF Signal between your application and PCB. MMCX RF connector is most commonly used in GPS Antenna cable, GSM external Antenna or GPS/GSM application these kinds of Radio Frequency applications.

Part Numbers

P/N & Drawing	Description	Cable Group	Ohm
C08AN31P00105 C08AN3FP00105 C08AN31P01105A C08ON30P00905 C08ON3FP00105	MCX RF connector straight jack for PCB MCX RF connector straight jack for PCB MCX RF connector straight jack for PCB MCX RF connector straight jack for PCB MCX RF connector straight jack for PCB	5.0mm 4.5mm 5.0mm 5.0mm 4.5mm	50 50 50 75 75

MCX connector jack straight for PCB mount 75ohm

Wellshow — Wed, 10 Feb 2010 09:01:21 +0000

MCX connector not only can terminate with RF coax cable but also PCB. This MCX connector is Jack(female) and straight PCB type. It’s designed to terminate with PCB. Its plating is Gold over brass and the impedance is 75 ohm.

MCX connector is small size compared with SMA connectors, SMB connectors. MCX Connector has snap-on coupling and can be mated easily and quickly. This 75ohm MCX connector jack PCB type commonly is used for 0~3GHz. If you have special performance request, special mechanical design, customized RF connectors, please contact us.

MCX connector jack straight PCB mount type can be soldered on PCB and plays the role to transmit RF Signal between your application and PCB. MCX RF connector is most commonly used in telecommunication cable.

Part Numbers

P/N & Drawing	Description	Cable Group	Ohm
C08ON30P00905 C08ON3FP00105	MCX RF connector straight jack for PCB MCX RF connector straight jack for PCB	5.0mm 4.5mm	75 75

MCX connector plug right angle crimp for RG179, RG187, Belden 9221

Wellshow — Wed, 10 Feb 2010 09:00:52 +0000

MCX connector is bigger than MMCX connector but smaller than SMB connector in RF connectors this big family. This MCX connector is plug/ male and right angle/ RA type with gold plating, but 75 ohm impendence. This MCX right angle plug is available for 75 ohm coax cable like RG179/ RG187/ Belden 9221 and RGD179.

MCX connector’s snap-on mating can get quick connect and quick disconnect function. MCX connector is low cost but with high quality. 75 ohm MCX Connector commonly is used for 0~3GHz. If you have any special request like high frequency of RF connector & RF coax cable, we are welcome OEM or customized products.

MCX connector plug right angle/ RA crimp type can be terminated with RG179/ RG187/ Belden 9221 RF coaxial Cable to transmit RF Signal well between telecommunications and initial PCB.

Part Numbers

P/N & Drawing	Description	Cable Group	Ohm
C07PA30179001-1	MCX RF connector R/A crimp plug	RG179, RG187, Belden 9221	75

MCX connector plug right angle crimp for RG58, RG174, RG316, RD316

Wellshow — Wed, 10 Feb 2010 09:00:09 +0000

MCX connector is bigger than MMCX connector but smaller than SMB connector in RF connectors this big family. This MCX connector is plug/ male and right angle/ RA type with gold plating and 50 ohm impendence. This MCX right angle plug can adapt RF coaxial cables like RG58/ RG174/ RG316/ RG179/ LMR195/ RG188/ RG303/ LMR100/RG141/ RG187/ Belden 9221

MCX connector’s snap-on mating can get quick connect and quick disconnect function. MCX connector is low cost but with high quality. MCX Connector commonly is used for 0~6GHz. If you have any special request like high frequency of RF connector & RF coax cable, we are welcome OEM or customized products.

MCX connector plug right angle (RA) crimp type can be terminated with RG58/ RG174/ RG316/ RG179/ LMR195/ RG188/ RG303/ LMR100/RG141/ RG187/ Belden 9221 RF coaxial Cable to transmit RF Signal well between telecommunications and initial PCB. MCX RF connector is most commonly used in GPS antenna, W-LAN antenna, and internal / external antenna and so on.

Part Numbers

P/N & Drawing	Description	Cable Group	Ohm
C07BA31174001-1 C07BA31316D01-1 C07BA3F058A01	MCX RF connector R/A crimp plug MCX RF connector R/A crimp plug MCX RF connector R/A crimp plug	RG174, RG316, RG188, LMR100 RD316 RG58, RG141, RG303, LMR195	50 50 50

MCX connector plug right angle crimp for LMR195, RG188, LMR100

Wellshow — Wed, 10 Feb 2010 08:59:36 +0000

MCX connector is bigger than MMCX connector but smaller than SMB connector in RF connectors this big family. This MCX connector is plug/ male and right angle/ RA type with gold plating and 50 ohm impendence. This MCX right angle plug can adapt RF coaxial cables like LMR195/ RG188/ RG303/ LMR100/RG141.

Please link MCX connector plug right angle crimp for RG58, RG174, RG316 and RD316 to get drawing of C07BA31174001-1 for RG188/ LMR100 coax cable, and C07BA3F058A01 for LMR195 coax cable.

MCX connector plug right angle solder for RG405 semi rigid cable

Wellshow — Wed, 10 Feb 2010 08:57:39 +0000

MCX connector is introduced in 1980’s in RF connectors. This MCX connector is plug/ male and right angle/ RA type. This MCX connector can be terminated with RG405 semi rigid cable, RG405 semi flex cable by soldering to be MCX RF pigtails. Its body plating is gold over brass and its impendence is 50 ohm.

MCX connector’s snap-on mating reduces installation time. Besides, MCX plug/ male crimp series have straight and right angle outlook. MCX Connector commonly is used for 0~6GHz. If you have any special request about RF connector & RF coax cable, we are welcome OEM or customized products.

This MCX connector soldering with RG405 semi rigid cable will provide very low loss in RF signal transmitting. MCX RF connector is most commonly used in GPS/GSM Antenna (internal or external) or WLAN or antenna cable these kinds of RF connectors industries.

Part Numbers

P/N & Drawing	Description	Cable Group	Ohm
C07BA31085012	MCX connector R/A solder plug	RG405, .085”semi rigid, .085”semi flex	50

MCX connector jack straight bulkhead crimp for RG174, RG316 coax cable

Wellshow — Wed, 10 Feb 2010 08:57:08 +0000

MCX connector is one kind of RF connectors and confirms to the European CECC 22220 specification. This MCX connector is jack/ female, and straight bulkhead type. This MCX jack bulkhead type can be terminated with RF Coax Cable like RG174, RG316, LMR100 and RG188. This MCX connector is machined with brass and plated with gold. The impedance is 50 ohm and it is RoHS compliant.

MCX jack crimp series not only have standard type but also have bulkhead type. MCX Connector commonly is used for 0~6 GHz. MMCX connector’s snap-on mating can reduce installation time successfully. If you have any special request of RF connector, RF coax cable and RF antennas, please contact us.

MCX connector jack straight bulkhead crimp type can be terminated with RG174, RG316, LMR100 and RG188 RF coaxial Cable to be RF pigtails. Although it is a small component, it can transmit up to 6GHz and easy mating. MCX RF connector is most commonly used in GPS Antenna cable, GSM Antenna cable or GPS/GSM application these kinds of RF industry.

Part Numbers

P/N & Drawing	Description	Cable Group	Ohm
C08AB30174002A	MCX RF connector straight bh. crimp jack	RG174, RG316, LMR100, RG188	50

MCX connector jack straight bulkhead crimp for 0.81mm, 1.32mm, 1.48mm, RG196

Wellshow — Wed, 10 Feb 2010 08:56:32 +0000

MCX connector confirms to the European CECC 22220 specification in RF connectors. This MCX connector is jack/ female, and straight bulkhead type. This MCX jack bulkhead type can be terminated with RF Coax Cable RG196, 0.81mm, 1.32mm, 1.48mm,1.32DS.

Please link MCX connector jack straight bulkhead crimp for RG178, 1.13mm, 1.32mm, 1.37mm to get drawing of C08AB31178002B for RG196 cable, C08AB31148002B for 1.48mm cable, C08AB31132002B for 1.32/ 1.32D mm coaxial cable, C08AB31081002B for 0.81mm coaxial cable.