Wellshow RF Connector, RF Coaxial Cable Assembly, GSM, GPS, WiFi Antenna Manufacturer » SMA Plug

SMA connector male right angle crimp for RG178, 1.13mm coax cable

Wellshow — Fri, 05 Feb 2010 06:19:12 +0000

Information

SMA (SubMiniature version A) connectors are coaxial RF connectors developed in the 1960s for coaxial cable with thread mating. The SMA connector has 50 ohm impedance. It offers excellent electrical performance from DC to 18 GHz.

This SMA right angle plug can combine with RF coaxial cable from 0.81mm, 1.13mm, 1.32mm, 1.37mm, 1.48mm, to RG178. If you want to use SMA right angle plug to match with thicker RF cable than the above, please link here.

SMA male connector has the 8mm hex coupling nut. Because RF SMA Connectors are compact in size and have outstanding durability and high-performance, SMA male and SMA female are the most popular RF connector in various application.

Part Numbers

P/N & Drawing	Description	Cable Group	Ohm
C01BA31081008 C01BA31113008 C01BA31132008 C01BA31137008 C01BA31148008 C01BA31178008	SMA right angle crimp plug SMA right angle crimp plug SMA right angle crimp plug SMA right angle crimp plug SMA right angle crimp plug SMA right angle crimp plug	0.81mm 1.13mm 1.32mm 1.37mm 1.48mm RG178	50 50 50 50 50 50

Cable Assembly

Cable assembly Instructions Crimp type

Step1. All parts of SMA RF connector are shown as the top line.

Step2. Strip the RF coaxial cable into center conductor, insulator, shielding three parts per recommended stripping dimension shown in SMA RF connector spec.

Step3. Slide the heat shrinking tube on cable jacket, ferrule on cable braid, spacer onto cable dielectric.

Step4. Insert the center conductor into the pin’s slot and solder it, and then push the other parts into main body until it stops.

Step5. Proceed the first open-short test to make sure signal can transmit well.

Step6. Place the insulator then cap on, and press cap into main body.

Step7. Heat shrink the shrinking tube.

Step8. Do the open-short test of every cable assembly before QC examination.

Specification

SMA Connector Technical Characteristics

Electrical
Impedance	50 ohm
Frequency range	0 ~ 18 GHz
VSWR	Straight type ≤ 1.3 max.
VSWR	R/A type ≤ 1.5 max.
Dielectric withstanding voltage	1000 V rms min. for RG142, RG405 750 V rms min. for RG316, RG402 500 V rms min. for RG178
Working voltage	500 V rms max. for RG142, RG405 375 V rms max. for RG316, RG402 170 V rms max. for RG178
Center contact resistance	≤ 6.0 mΩ (Milliohms max.)
Outer contact resistance	≤ 2.0 mΩ (Milliohms max.)
Insulation resistance	≥ 5×10³MΩ (Megohms min.)

Mechanical
Coupling	1/4-36 thread
Contact Retention	15 in-lbs. min.
Mating torque	2 in-lbs. min.
Mating Durability	500 cycles min. (For Beryllium copper contact only)

Environmental
Temperature Range	−65ºC ~ +155 ºC
Vibration	MIL-STD-202 Meth. 204
Corrosion resistance	MIL-STD-202 Meth. 101

Materials
Body, coupling nut	Brass, Non-magnetic stainless steel
Insulator	Teflon
Center contact	Brass for male, Beryllium copper for female
Crimping sleeve	Annealed Brass
Body plating	Nickel (Ni), Gold (Au), Passivated
Center contact plating	Gold (Au)

Note: These characteristics are typical and may not apply to all connectors.

SMA connector male right angle crimp for 0.81mm, 1.48mm coax cable

Wellshow — Fri, 05 Feb 2010 06:11:28 +0000

This SMA right angle plug can combine with RF coaxial cable from 0.81, 1.48mm. If you want to use SMA right angle plug to match with thicker RF cable than the above, please link here.

SMA connector male right angle crimp for 0.81mm (PN#C01BA31081008), 1.48mm (PN#C01BA31148008) coax cable is same as SMA connector male right angle crimp for RG178, 1.13mm coax cable. Please link to get details.

SMA connector male right angle crimp for 1.32mm, 1.37mm coax cable

Wellshow — Fri, 05 Feb 2010 06:09:09 +0000

This SMA right angle plug can combine with RF coaxial cable from 1.32mm, 1.37mm. If you want to use SMA right angle plug to match with thicker RF cable than the above, please link here.

SMA connector male right angle crimp for 1.32mm (PN#C01BA31132008), 1.37mm (PN#C01BA31137008) coax cable is same as SMA connector male right angle crimp for RG178, 1.13mm coax cable. Please link to get details.

SMA connector male right angle solder for RG402 semi rigid, semi flex cable

Wellshow — Fri, 05 Feb 2010 06:00:20 +0000

SMA connector can work up to 18 GHz by soldering with low loss semi rigid or semi flex cable. This right angle male SMA connector is designed to be soldered with RG402 (.141”) semi rigid or semi flex cable.

Right angle SMA male connector soldering with semi rigid or semi flex cable can work at high frequency, but only rare loss. Such good performance SMA cable is the first choice to work as RF testing coax cable assembly for testing instrument.

Wellshow PN is C01BA31141008B for right angle SMA male solder type for RG402 semi rigid cable. Please link SMA connector male right angle solder for RG405 semi rigid, semi flex cable to get details and drawings.

If you need straight SMA male connector for RG402, RG405 semi rigid or semi flex cable, please link here.

SMA connector male right angle crimp for RG223 coax cable

Wellshow — Fri, 05 Feb 2010 05:56:18 +0000

This male SMA connector is a cable connector which is designed to terminate with thicker coaxial cables. This SMA plug connector is designed for RG223 coaxial cable by crimp.