Information
MMCX RF Connectors
MMCX connector is one kind of RF coax connectors. This MMCX connector is jack/ female and straight type. It’s designed to terminate with PCB. Its plating is Gold over brass and the impedance is 50 ohm.
MMCX connector is small size compared with SMA connectors, SMB connectors, MCX connectors. MMCX Connector has snap-on coupling and can be mated easily and quickly. Besides, MMCX jack crimp series still have Right angle jack, straight bulkhead crimp jack, straight jack, edge mount jack and SMT jack. MMCX Connector commonly is used for 0~3GHz. If you need higher working frequency, special mechanical design, customized RF connectors, or RF cables, please contact us.
MMCX connector jack straight PCB mount type can be soldered on PCB and plays the role to transmit RF Signal in telecommunications. MMCX RF connector is most commonly used in GPS Antenna, GSM Antenna or GPS/GSM application these kinds of Radio Frequency applications.
Part Numbers
| P/N | RF connector description | Ohm |
| C06AN3KP00402 | MMCX RF connector straight jack for PCB | 50 |
Specification
| Electrical | |
| Impedance | 50 ohm |
| Frequency range | 0 ~ 6 GHz |
| VSWR | Straight type ≤ 1.3 max. |
| R/A type ≤ 1.5 max. | |
| Dielectric withstanding voltage | 500 V rms |
| Working voltage0 | 170 V rms |
| Center contact resistance | ≤ 5.0 mΩ (Milliohms max.) |
| Outer contact resistance | ≤ 2.5 mΩ (Milliohms max.) |
| Insulation resistance | ≥ 103 MΩ (Megohms min.) |
| Mechanical | |
| Coupling | Lock-snap |
| Contact Retention | 2.3 lbs min. |
| Mating Durability | 500 cycles min. (For Beryllium copper contact only) |
| Environmental | |
| Temperature Range | Teflon −65ºC ~ +155 ºC |
| Vibration | MIL-STD-202 Meth. 204 |
| Corrosion resistance | MIL-STD-202 Meth. 101 |
| Materials | |
| Body, coupling nut | Brass |
| Insulator | Teflon |
| Center contact | Brass for male, |
| Beryllium copper for female | |
| Crimping sleeve | Annealed Brass |
| Body plating | Gold (Ag) |
| Center contact plating | Gold (Ag) |
Note: These characteristics are typical and may not apply to all connectors.
